ESEE-6 3D Handle – 6.50″ 1095 Orange Plain Edge Drop Point Blade, Orange and Black 3D G-10 Handle – 6POR-006

The ESEE-6 is a full-size survival knife that balances size, weight, and heft: nimble enough for smaller tasks, with enough weight and edge length for bigger jobs. This 3D Handle version pairs a 6.50″ orange-coated 1095 drop-point blade with contoured orange and black G-10 handle scales and a black injection-molded sheath.

1095 carbon steel is a classic choice for large survival knives: tough, easy to sharpen in the field, and forgiving under hard use. ESEE runs it at 55-57 HRC. The flat-ground plain edge handles chopping, batoning, and camp work along its full length. Hold the handle further back for more power when chopping, or choke up onto the finger choil for control during precise carving. The orange blade and handle make the knife easy to spot if you set it down in the field.

• Blade: 6.50″ 1095 carbon steel drop point, orange finish, flat grind, plain edge, 55-57 HRC. 11.75″ overall.
• Handle: 3D-contoured orange and black G-10 with a finger choil for a secure, high-visibility grip. 5.25″ handle length.
• Sheath: Black injection-molded sheath included.
• Carry: 13.00 oz.

Ideal for: backcountry campers and hunters who want one full-size knife for chopping and detail work; survival and bushcraft trainees who need a large, tough fixed blade; and outdoor users who want a high-visibility knife that is easy to find.

Care: 1095 is carbon steel, not stainless. The orange finish helps protect the blade, but the edge and any worn areas can rust or patina. Keep the knife dry and lightly oiled.

ESEE-6 3D Handle Orange: Frequently Asked Questions

Answers to the most common questions about the ESEE-6 3D Handle in orange with orange and black G-10 (6POR-006).

What kind of blade and sheath does the ESEE-6 3D Handle have?

It is a fixed blade with a 6.50-inch 1095 carbon steel drop-point blade, hardened to 55-57 HRC, with an orange finish, a flat grind, and a plain edge. It comes with a black injection-molded sheath.

What is included with the ESEE-6 3D Handle?

The knife comes with its black injection-molded sheath. Contents are subject to change by the manufacturer.

How is this different from the ESEE-6S?

Both share the same 6.50-inch 1095 blade length and overall size. This version has a full plain edge, an orange blade finish, and contoured orange and black G-10 3D handle scales.

How do I use the ESEE-6 for both chopping and carving?

For chopping, hold the handle further back to put more of the blade’s weight into each swing. For precise carving and detail work, choke up and place your finger in the finger choil just behind the edge for added control.

Will the 1095 carbon steel blade rust?

It can. 1095 is carbon steel, not stainless, so it needs more care than stainless steels. The orange finish helps protect the blade, but the edge and any worn areas can rust or patina if left wet. Wipe the knife dry after use and keep a light coat of oil on it.

What warranty does the ESEE-6 have, and where is it made?

ESEE describes its warranty as one of the most extensive available. Contact ESEE or visit eseeknives.com for current warranty terms and service. The ESEE-6 is made in the USA.

1095 Carbon Steel · 3D G-10 Handle · Made in USA

Carry the High-Visibility ESEE-6

A 6.5-inch 1095 survival knife with an orange blade, contoured orange and black G-10 handle, and finger choil for chopping and carving.

Specifications