ESEE-5 3D Handle – 5.25″ 1095 Orange Plain Edge Drop Point Blade, Orange and Black 3D G-10 Handle – 5POR-006

The ESEE-5 is a heavy-duty survival knife that ESEE says was designed by military SERE instructors as a downed pilot’s survival knife. This 3D Handle version pairs a 5.25″ orange-coated 1095 blade with contoured orange and black G-10 handle scales and a black Kydex belt sheath.

1095 carbon steel is a classic choice for hard-use survival knives: tough, easy to sharpen in the field, and forgiving under heavy work. ESEE runs it at 55-57 HRC. At 0.25″ thick with a saber grind, the blade keeps extra steel behind the edge for strength during chopping and other heavy tasks. Every ESEE-5 also has a sharpened glass breaker pommel and a bow drill divot in the handle for fire starting.

• Blade: 5.25″ 1095 carbon steel drop point, orange finish, saber grind, plain edge, 0.25″ thick, 55-57 HRC. 11.00″ overall.
• Handle: 3D-contoured orange and black G-10 for a secure, high-visibility grip, with a bow drill divot and a sharpened glass breaker pommel. 5.75″ handle length.
• Sheath: Black Kydex belt sheath included.
• Carry: 17.00 oz.

Ideal for: hard-use survival and preparedness buyers who want a thick, heavy-duty fixed blade; bushcrafters who want a bow drill divot built into the handle; and outdoor users who want a high-visibility knife that is easy to find.

Glass breaker: Laws on knives with glass breakers and similar tools vary. Check your local laws and use this tool lawfully.

Care: 1095 is carbon steel, not stainless. The orange finish helps protect the blade, but the edge and any worn areas can rust or patina. Keep the knife dry and lightly oiled.

ESEE-5 3D Handle Orange: Frequently Asked Questions

Answers to the most common questions about the ESEE-5 3D Handle in orange with orange and black G-10 (5POR-006).

What kind of blade and sheath does the ESEE-5 3D Handle have?

It is a fixed blade with a 5.25-inch 1095 carbon steel drop-point blade, 0.25 inch thick, hardened to 55-57 HRC, with an orange finish, a saber grind, and a plain edge. It comes with a black Kydex belt sheath.

What is included with the ESEE-5 3D Handle?

The knife comes with its black Kydex belt sheath. Contents are subject to change by the manufacturer.

What are the glass breaker pommel and bow drill divot for?

The sharpened pommel at the end of the handle is designed as a glass breaker. The divot in the handle can serve as a bearing block for a bow drill, a traditional friction method for starting a fire. Laws on knives with glass breakers vary, so check your local laws and use the tool lawfully.

Why does the ESEE-5 use a saber grind?

A saber grind starts partway down the blade, leaving a thicker section of steel along the spine. Combined with the 0.25-inch blade stock, that keeps more steel behind the edge for strength during chopping and other heavy tasks, while still giving a usable cutting edge.

Will the 1095 carbon steel blade rust?

It can. 1095 is carbon steel, not stainless, so it needs more care than stainless steels. The orange finish helps protect the blade, but the edge and any worn areas can rust or patina if left wet. Wipe the knife dry after use and keep a light coat of oil on it.

What warranty does the ESEE-5 have, and where is it made?

ESEE describes its warranty as one of the most extensive available. Contact ESEE or visit eseeknives.com for current warranty terms and service. The ESEE-5 is made in the USA.

1095 Carbon Steel · 0.25-Inch Blade Stock · Made in USA

Carry the Heavy-Duty ESEE-5

A thick 1095 survival knife with a saber grind, a glass breaker pommel, a bow drill divot, and a contoured orange and black G-10 handle.

Specifications