ESEE-4 – 4.50″ 1095 Black Textured Powder Coat Part Serrated Drop Point Blade, Gray Micarta Handle – ESEE-4S-MB

The ESEE-4 is an all-around survival, bushcraft, and outdoor fixed blade designed by Jeff Randall and Mike Perrin. This version pairs a 4.50″ 1095 drop-point blade in a black textured powder coat with a partially serrated edge, gray Micarta handle scales, and a black polymer sheath with a MOLLE back.

1095 carbon steel is a classic choice for survival knives: tough, easy to sharpen in the field, and forgiving under hard use. ESEE runs it at 55-57 HRC. The 0.19″ thick blade stock stands up to batoning, while the flat grind keeps the plain section thin enough for clean slicing. The serrated section near the handle helps cut through rope, cordage, webbing, and other tough materials. ESEE knives are used at Randall’s Adventure & Training jungle survival school and by outdoor users around the world.

• Blade: 4.50″ 1095 carbon steel drop point, black textured powder coat, flat grind, partially serrated edge, 0.19″ thick, 55-57 HRC. 9.00″ overall.
• Handle: Gray Micarta for a secure, natural grip. 4.50″ handle length.
• Sheath: Injection-molded black polymer sheath with a MOLLE back.
• Carry: 8.00 oz, mounts on a belt, pack, or MOLLE gear.

Ideal for: hunters and campers who want a mid-size knife that handles both slicing and rope work; preppers and outdoor users who want MOLLE-compatible mounting on a pack or vest; and buyers who want a low-profile black blade and sheath.

Care: 1095 is high-carbon steel, not stainless, and it will rust and stain if not cared for, especially along the cutting edge and around the laser engraving. The powder coat helps protect the blade faces, but keep the edge clean, dry, and protected with a dry-film rust inhibitor or a light coat of oil.

ESEE-4 Partially Serrated, Black MOLLE-Back Sheath: Frequently Asked Questions

Answers to the most common questions about the ESEE-4 with a partially serrated black textured powder coat blade, gray Micarta, and black MOLLE-back sheath (ESEE-4S-MB-B).

What kind of blade and sheath does this ESEE-4 have?

It is a fixed blade with a 4.50-inch 1095 carbon steel drop-point blade, 0.19 inch thick, hardened to 55-57 HRC, with a black textured powder coat, a flat grind, and a partially serrated edge. It comes with an injection-molded black polymer sheath with a MOLLE back.

What is included with this ESEE-4?

The knife comes with its black polymer sheath with a MOLLE back. Contents are subject to change by the manufacturer.

What does the MOLLE back on the sheath do?

A MOLLE back lets you mount the sheath to the webbing found on many packs, vests, and tactical gear, in addition to belt carry. That gives you more options for where the knife rides.

How is this different from other ESEE-4 versions?

All ESEE-4 models share the same 4.50-inch 1095 blade. This version pairs a partially serrated black blade and gray Micarta with a black MOLLE-back sheath. The ESEE-4S-MB has the same knife with a Coyote Brown MOLLE-back sheath, the ESEE-4S-B has a black sheath without the MOLLE back, and the ESEE-4S-KO is sold without a sheath.

How do I sharpen and care for this knife?

Sharpen the plain section as you would any plain edge, and use a tapered ceramic rod on the beveled side of the serrations. 1095 is high-carbon steel, not stainless, so it will rust and stain if neglected, especially along the cutting edge and around the laser engraving. Clean and dry the blade after use and protect it with a dry-film rust inhibitor or a light coat of oil.

What warranty does the ESEE-4 have, and where is it made?

ESEE describes its warranty as one of the most extensive available. Contact ESEE or visit eseeknives.com for current warranty terms and service. The ESEE-4 is made in the USA.

1095 Carbon Steel · MOLLE-Back Sheath · Made in USA

Carry the ESEE-4 with a Black MOLLE-Back Sheath

A 4.5-inch 1095 survival knife with a partially serrated black textured powder coat blade, gray Micarta handle, and black MOLLE-back sheath.

Specifications