ESEE-6 3D Handle – 6.50″ 1095 Venom Green Plain Edge Drop Point Blade, Neon Green and Black 3D G-10 Handle – 6PVG-007

The ESEE-6 is a full-size survival knife that balances size, weight, and heft: nimble enough for smaller tasks, with enough weight and edge length for bigger jobs. This 3D Handle version pairs a 6.50″ Venom Green 1095 drop-point blade with contoured neon green and black G-10 handle scales and a black injection-molded sheath.

1095 carbon steel is a classic choice for large survival knives: tough, easy to sharpen in the field, and forgiving under hard use. ESEE runs it at 55-57 HRC. The flat-ground plain edge handles chopping, batoning, and camp work along its full length. Hold the handle further back for more power when chopping, or choke up onto the finger choil for control during precise carving. The neon green handle makes the knife easy to spot if you set it down in the field.

• Blade: 6.50″ 1095 carbon steel drop point, Venom Green finish, flat grind, plain edge, 55-57 HRC. 11.75″ overall.
• Handle: 3D-contoured neon green and black G-10 with a finger choil for a secure, high-visibility grip. 5.25″ handle length.
• Sheath: Black injection-molded sheath included.
• Carry: 13.00 oz.

Ideal for: backcountry campers and hunters who want one full-size knife for chopping and detail work; survival and bushcraft trainees who need a large, tough fixed blade; and outdoor users who want a high-visibility knife that is easy to find.

Care: 1095 is carbon steel, not stainless. The Venom Green finish helps protect the blade, but the edge and any worn areas can rust or patina. Keep the knife dry and lightly oiled.

ESEE-6 3D Handle Venom Green: Frequently Asked Questions

Answers to the most common questions about the ESEE-6 3D Handle in Venom Green with neon green and black G-10 (6PVG-007).

What kind of blade and sheath does the ESEE-6 3D Handle have?

It is a fixed blade with a 6.50-inch 1095 carbon steel drop-point blade, hardened to 55-57 HRC, with a Venom Green finish, a flat grind, and a plain edge. It comes with a black injection-molded sheath.

What is included with the ESEE-6 3D Handle?

The knife comes with its black injection-molded sheath. Contents are subject to change by the manufacturer.

Should I choose the Venom Green or orange ESEE-6 3D Handle?

Both share the same 6.50-inch 1095 blade, plain edge, 3D G-10 handle shape, and sheath. Choose Venom Green with neon green and black G-10, or orange with orange and black G-10.

How do I use the ESEE-6 for both chopping and carving?

For chopping, hold the handle further back to put more of the blade’s weight into each swing. For precise carving and detail work, choke up and place your finger in the finger choil just behind the edge for added control.

Will the 1095 carbon steel blade rust?

It can. 1095 is carbon steel, not stainless, so it needs more care than stainless steels. The Venom Green finish helps protect the blade, but the edge and any worn areas can rust or patina if left wet. Wipe the knife dry after use and keep a light coat of oil on it.

What warranty does the ESEE-6 have, and where is it made?

ESEE describes its warranty as one of the most extensive available. Contact ESEE or visit eseeknives.com for current warranty terms and service. The ESEE-6 is made in the USA.

1095 Carbon Steel · 3D G-10 Handle · Made in USA

Carry the ESEE-6 in Venom Green

A 6.5-inch 1095 survival knife with a Venom Green blade, contoured neon green and black G-10 handle, and finger choil for chopping and carving.

Specifications