ESEE-3 – 3.88″ 1095 Desert Tan Part Serrated Drop Point Blade, Tan Micarta Handle, Modified Pommel – ESEE-3SM-MB-DT

The ESEE-3 is an all-purpose outdoor, bushcraft, and survival fixed blade, built to be tough while staying compact and lightweight. This version pairs a 3.88″ Desert Tan 1095 drop-point blade with a partially serrated edge, tan Micarta handle scales with a modified pommel, and an OD Green polymer sheath with a MOLLE back.

1095 carbon steel is a classic outdoor steel: tough, easy to sharpen in the field, and dependable under hard use. ESEE runs it at 55-57 HRC. The 0.125″ thick, flat-ground blade slices thin for processing game and making tinder, while the serrated section near the handle helps cut through rope, cordage, webbing, and other tough materials. The modified pommel gives the handle a distinct profile and a slightly shorter overall length than the standard ESEE-3.

• Blade: 3.88″ 1095 carbon steel drop point, Desert Tan finish, flat grind, partially serrated edge, 0.125″ thick, 55-57 HRC. 8.19″ overall.
• Handle: Tan Micarta with a modified pommel, for a secure, natural grip. 4.31″ handle length.
• Sheath: Injection-molded OD Green polymer sheath with a MOLLE back.
• Carry: 5.2 oz, mounts on a belt, pack, or MOLLE gear.

Ideal for: bushcrafters and survival trainees who want serrations for rope and cordage on a compact fixed blade; outdoor users who want MOLLE-compatible mounting on a pack or vest; and ESEE-3 fans who want the modified pommel in a matched Desert Tan and tan colorway.

Care: 1095 is carbon steel, not stainless. The Desert Tan finish helps protect the blade, but the edge and any worn areas can rust or patina. Keep the knife dry and lightly oiled.

ESEE-3 Modified Pommel, Desert Tan: Frequently Asked Questions

Answers to the most common questions about the ESEE-3 with a modified pommel, partially serrated Desert Tan blade, tan Micarta, and OD Green MOLLE-back sheath (ESEE-3SM-MB-DT).

What kind of blade and sheath does this ESEE-3 have?

It is a fixed blade with a 3.88-inch 1095 carbon steel drop-point blade, 0.125 inch thick, hardened to 55-57 HRC, with a Desert Tan finish, a flat grind, and a partially serrated edge. It comes with an injection-molded OD Green polymer sheath with a MOLLE back.

What is included with this ESEE-3?

The knife comes with its OD Green polymer sheath with a MOLLE back. Contents are subject to change by the manufacturer.

How is the modified pommel different from the standard ESEE-3?

The modified pommel gives the handle a distinct profile and makes the knife slightly shorter: 8.19 inches overall with a 4.31-inch handle, compared with 8.31 inches and 4.43 inches on the standard-pommel ESEE-3. The blade is the same.

How does this compare to similar ESEE-3 versions?

The ESEE-3P-MB-DT has the same Desert Tan blade, tan Micarta, and OD Green MOLLE-back sheath with a full plain edge and the standard pommel. The ESEE-3SM-MB-CO has the same partially serrated blade and modified pommel with gray Micarta and a Coyote Brown sheath.

How do I use the MOLLE back, sharpen, and care for this knife?

The MOLLE back lets you mount the sheath to webbing on packs and vests as well as a belt. Sharpen the plain section as you would any plain edge, and use a tapered ceramic rod on the beveled side of the serrations. 1095 is carbon steel, not stainless, so wipe the knife dry after use and keep a light coat of oil on it.

What warranty does the ESEE-3 have, and where is it made?

ESEE describes its warranty as one of the most extensive available. Contact ESEE or visit eseeknives.com for current warranty terms and service. The ESEE-3 is made in the USA.

1095 Carbon Steel · Modified Pommel · Made in USA

Carry the ESEE-3 Modified Pommel in Desert Tan

A compact 3.88-inch 1095 fixed blade with a partially serrated edge, a modified pommel, a tan Micarta handle, and an OD Green MOLLE-back sheath.

Specifications