ESEE-5 – 5.25″ 1095 Black Part Serrated Drop Point Blade, Tan Micarta Handle – ESEE-5S-E

The ESEE-5 is a heavy-duty survival knife that ESEE says was designed by military SERE instructors as a downed pilot’s survival knife. This version pairs a 5.25″ black-coated 1095 blade with a partially serrated edge, tan Micarta handle scales, and a black Kydex belt sheath.

1095 carbon steel is a classic choice for hard-use survival knives: tough, easy to sharpen in the field, and forgiving under heavy work. ESEE runs it at 55-57 HRC. At 0.25″ thick with a saber grind, the blade keeps extra steel behind the edge for strength during chopping and other heavy tasks, while the serrated section near the handle helps cut through rope, cordage, and webbing. Every ESEE-5 also has a sharpened glass breaker pommel and a bow drill divot in the handle for fire starting.

• Blade: 5.25″ 1095 carbon steel drop point, black finish, saber grind, partially serrated edge, 0.25″ thick, 55-57 HRC. 11.00″ overall.
• Handle: Tan Micarta for a secure, natural grip, with a bow drill divot and a sharpened glass breaker pommel. 5.75″ handle length.
• Sheath: Black Kydex belt sheath included.
• Carry: 16.00 oz.

Ideal for: hard-use survival and preparedness buyers who want a thick, heavy-duty fixed blade; outdoor users who cut rope, cordage, and webbing often; and bushcrafters who want a bow drill divot built into the handle.

Glass breaker: Laws on knives with glass breakers and similar tools vary. Check your local laws and use this tool lawfully.

Care: 1095 is carbon steel, not stainless. The black finish helps protect the blade, but the edge and any worn areas can rust or patina. Keep the knife dry and lightly oiled.

ESEE-5 Partially Serrated: Frequently Asked Questions

Answers to the most common questions about the ESEE-5 with a partially serrated black blade and tan Micarta (ESEE-5S-E).

What kind of blade and sheath does this ESEE-5 have?

It is a fixed blade with a 5.25-inch 1095 carbon steel drop-point blade, 0.25 inch thick, hardened to 55-57 HRC, with a black finish, a saber grind, and a partially serrated edge. It comes with a black Kydex belt sheath.

What is included with this ESEE-5?

The knife comes with its black Kydex belt sheath. Contents are subject to change by the manufacturer.

What are the glass breaker pommel and bow drill divot for?

The sharpened pommel at the end of the handle is designed as a glass breaker. The divot in the handle can serve as a bearing block for a bow drill, a traditional friction method for starting a fire. Laws on knives with glass breakers vary, so check your local laws and use the tool lawfully.

Should I choose the partially serrated or plain edge ESEE-5?

Choose this partially serrated version if you often cut rope, cordage, or webbing. Choose a plain edge for clean slicing and simpler sharpening. To sharpen the serrations, use a tapered ceramic rod on the beveled side only.

Will the 1095 carbon steel blade rust?

It can. 1095 is carbon steel, not stainless, so it needs more care than stainless steels. The black finish helps protect the blade, but the edge and any worn areas can rust or patina if left wet. Wipe the knife dry after use and keep a light coat of oil on it.

What warranty does the ESEE-5 have, and where is it made?

ESEE describes its warranty as one of the most extensive available. Contact ESEE or visit eseeknives.com for current warranty terms and service. The ESEE-5 is made in the USA.

1095 Carbon Steel · Partially Serrated · Made in USA

Carry the Partially Serrated ESEE-5

A thick 1095 survival knife with a saber grind, serrations for rope and cordage, a glass breaker pommel, and a tan Micarta handle.

Specifications