ESEE-3 Fixed Blade – 3.88″ OD Green 1095 Partially Serrated Drop Point Blade, Orange G-10 Handle – ESEE-3S-MB-OD-CO

The ESEE-3 is an all-purpose outdoor, bushcraft, and survival fixed blade, built to be tough while staying compact and lightweight. This version pairs a 3.88″ OD Green 1095 drop-point blade with a partially serrated edge, high-visibility orange G-10 handle scales, and an injection-molded sheath with a MOLLE back.

1095 carbon steel is a classic outdoor steel: tough, easy to sharpen in the field, and dependable under hard use. ESEE runs it at 55-57 HRC. The 1/8″ thick, flat-ground blade slices thin for processing game and making tinder, while the partially serrated section near the handle helps cut through cordage, webbing, and other tough, fibrous materials. The bright orange handle makes the knife easier to spot if you set it down in leaves or brush.

• Blade: 3.88″ 1095 carbon steel drop point, OD Green finish, flat grind, partially serrated edge, 0.125″ thick, 55-57 HRC. 8.31″ overall.
• Handle: Orange G-10, compact and comfortable, with high visibility in the field. 4.43″ handle length.
• Sheath: Injection-molded sheath with a MOLLE back.
• Carry: 5.2 oz, mounts on a belt or MOLLE gear.

Ideal for: bushcrafters and survival trainees who want a compact, all-purpose fixed blade; hunters who want a high-visibility handle that is easy to find if dropped; and outdoor users who want serrations for rope and webbing alongside a plain cutting edge.

Care: 1095 is carbon steel, not stainless. The OD Green finish helps protect the blade, but the edge and any worn areas can rust or patina. Keep the knife dry and lightly oiled.

ESEE-3 OD Green and Orange G-10: Frequently Asked Questions

Answers to the most common questions about the ESEE-3 with an OD Green partially serrated blade and orange G-10 (ESEE-3S-MB-OD-CO).

What kind of blade and sheath does this ESEE-3 have?

It is a fixed blade with a 3.88-inch 1095 carbon steel drop-point blade, 0.125 inch thick, hardened to 55-57 HRC, with an OD Green finish, a flat grind, and a partially serrated edge. It comes with an injection-molded sheath with a MOLLE back.

What is included with this ESEE-3?

The knife comes with its injection-molded sheath with a MOLLE back. Contents are subject to change by the manufacturer.

Should I choose the orange G-10 or gray Micarta ESEE-3?

Both share the same 1095 blade size, partially serrated edge, and MOLLE-back sheath design. Choose orange G-10 with an OD Green blade for a high-visibility handle that is easy to spot in the field. Choose gray Micarta with a black blade for a more subdued look.

How do I use and sharpen the partially serrated edge?

The plain section toward the tip handles clean slicing and carving, while the serrated section near the handle grips and saws through rope, cordage, and webbing. Sharpen the plain section as usual, and use a tapered ceramic rod or a sharpening system with corner edges for the serrations, working only the beveled side.

Will the 1095 carbon steel blade rust?

It can. 1095 is carbon steel, not stainless, so it needs more care than stainless steels. The OD Green finish helps protect the blade, but the edge and any worn areas can rust or patina if left wet. Wipe the knife dry after use and keep a light coat of oil on it.

What warranty does the ESEE-3 have, and where is it made?

ESEE describes its warranty as one of the most extensive available. Contact ESEE or visit eseeknives.com for current warranty terms and service. The ESEE-3 is made in the USA.

1095 Carbon Steel · High-Visibility G-10 · Made in USA

Carry the High-Visibility ESEE-3

A compact 1095 fixed blade with an OD Green partially serrated blade, orange G-10 handle, and a MOLLE-ready sheath.

Specifications